Mode of action of a surfactant–polymer formulation to support performance of the entomopathogenic nematode Steinernema carpocapsae for control of diamondback moth larvae (Plutella xylostella)

The use of entomopathogenic nematodes on cabbage leaves against larvae of the diamondback moth (DBM) Plutella xylostella requires the addition of formulation adjuvants to achieve satisfying control. Without adjuvants nematodes settle in the tank mix of backpack sprayers causing uneven distribution. The polymers arabic and guar gum, alginate and xanthan were used in concentrations between 0.05 and 0.3% to retard sedimentation of Steinernema carpocapsae. Arabic gum had no effect, guar gum prevented sedimentation at 0.3% but the effect dropped significantly at lower concentration. At 0.05%, xanthan prevented nematode sedimentation better than alginate. Deposition of nematodes on the leaves was significantly increased by the addition of any of the polymers. Spraying nematodes on leaves with an inclination of 45° without the addition of any formulation resulted in 70% run-off. Adding 0.2% alginate or xanthan reduced the losses to <20%. The use of a surfactant–polymer formulation significantly reduced defoliation by DBM larvae. Visual examinations provided evidence that nematodes are not ingested by DBM larvae. Invasion of S. carpocapsae is an active process via the anus. The function of the formulation is not to prolong nematode survival, but to provide environmental conditions which enable rapid invasion of the nematodes. Nematode performance was improved by selection of the best surfactant in combination with xanthan and by optimisation of the concentrations of the surfactant Rimulgan® and the polymer xanthan. The best control results were achieved with Rimulgan® at 0.3% together with 0.3% xanthan, causing DBM mortality of >90% at 80% relative humidity and >70% at 60%. The formulation lowered the LC₅₀ from 12 to 1 nematode/larva. The viscosity of the surfactant–polymer formulations correlated well with nematode efficacy, prevention of sedimentation and adherence to the leave. This physical parameter can therefore be recommended for improvement of nematode formulations to be used for foliar application against DBM.     

Alginate embedding and subsequent sporulation of in vitro-produced Conidiobolus thromboides hyphae using a pressurised air-extrusion method

Conidiobolus thromboides is an entomophthoralean fungus with potential as a biological control agent of aphids. However, its application in biological control is limited due to its formulation requirements. The objective of this study was to develop and optimise a novel air-extrusion method to embed C. thromboides hyphae at high density in alginate pellets. An orthogonal experimental design was used to investigate selected combinations of parameters known to affect hyphal density within pellets. The diameter of pellets produced, and the calculated density of hyphae within them, ranged from 0.18 ± 0.09 to 3.17 ± 0.06 mm and from 0.02 to 350.56 mg/mm³ respectively. These data were used to predict the optimal parameter combination to deliver the greatest density of hyphae of C. thromboides per pellet: 1% sodium alginate, a 1:2 ratio of hyphae to sodium alginate, an orifice diameter of 0.232 mm and an air pressure of 0.05 MPa. Pellets made under the optimal conditions predicted produced a mean total of 4.3 ± 0.6 × 10⁵ conidia per pellet at 100% relative humidity which was significantly greater than the mean total number of conidia produced from infected aphid cadavers of comparable size (9.35 ± 0.85 × 10⁴) (p < 0.001). In conclusion, air-extrusion embedding appears to be a promising method for formulating in vitro-produced hyphae of C. thromboides for use in biological control.     

Active compounds in Populus nigra L. wilted leaves responsible for attracting Helicoverpa armigera (Hübner) (Lep., Noctuidae) and new agaropectin formulation

Abstract:  The leaf extracts of Populus nigra were collected and identified by steam distillation, air entrainment and gas chromatographic–mass spectrometric analysis. Electroantennograms were recorded from Helicoverpa armigera adults in response to the chemicals identified. Both aromatic compounds and green-leaf volatiles elicited strong responses. Field experiments revealed that the active compounds responsible for attracting H. armigera moths are mainly short-side-chain aromatic alcohols and aldehydes. We, for the first time, used agaropectin as the controlled-release matrix of insect attractants. A five-component lure containing all the aromatics without phenolics, mixed in the proportions as found in the steam distillate of the leaves collected in August, produced the best trap catch. The results showed that the volatiles of wilted leaves of P. nigra can attract H. armigera adults by feeding attraction.     

Long-term effects of lactational zinc deficiency on bone mineral composition in rats fed a commercially modified Luecke diet

The purpose of this study was threefold: 1. to determine the long-term effects of interactions between lactational zinc deficiency and gender on bone mineral composition in repleted rat offspring, 2. to determine the nutritional efficacy of the second of two commercially designed, modified Luecke diets (ML2) during the gestational and lactational stress, and 3. determine the ultratrace element contents of Ralston Rodent Laboratory Chow #5001. The ML2 basal diet, based on dextrose, sprayed egg white, and corn oil contained 0.420 μg Zn/g, was supplemented with Zn (as zinc acetate) at 0 (diet 0ML2) or 30 (diet 30ML2) μg/g, and was mixed and pelleted commercially. all rat dams were fed the 30ML2 diet ad libitum during gestation. Beginning at parturition, the dams were fed either the 1. 0ML2, 2. 30ML2 (food restricted), or 3. 30ML2 (ad libitum) diets. All pups were fed the 30ML2 diet ad libitum from 23 to 40 d of age. From d 40 to 150, all pups were fed Ralston Rodent Laboratory Chow. The 30ML2 diet was found to be nutritionally efficacious; litter size and pup growth were normal and pup mortality was only 1.2%. Pups (ZD) with access to the 0ML2 diet until 23 d of age and nursed by dams fed the 0ML2 diet, when compared to pups (PF) fed restricted amounts of the 30ML2 diet, exhibited increased mortality and decreased concentrations of tibial zinc but no change in growth. Inadequate zinc nutriture during infancy, despite postlactational zinc repletion, induced imbalances in adult bone mineral metabolism. Thus, at 150 d of age, the ZD pups exhibited increased levels of bone P and Mg and decreased concentrations of K as compared to the PF pups.     

Woronin bodies in arthrinium genus

Woronin bodies are present near all septal pores and in conidia of Arthrinium strains and may regulate cytoplasmic flow in both injured and actively growing healthy colonies. They vary in size and frequency, the central one plugs the septal pores in actively developing colonies and in mature conidia. The septa are thinner in the Woronin-body region.     

Studies on the prolonged storage of Metarhizium anisopliae conidia: effect of growth substrate on conidial survival and virulence against mosquitoes

Metarhizium anisopliae was grown on six complex mycological media and on three types of rice at three moisture levels to determine the effect of growth substrate on conidial yield, viability, and virulence against mosquitoes immediately after spore maturation and after the storage of conidia at four different temperature-relative humidity (RH) combinations over a 1-year period. Conidial yields varied with the mycological media, but the viability and virulence of conidia against mosquitoes produced on all substrates were similar when spores were stored under the same conditions. The storage conditions were more critical to spore survival and virulence than the substrate upon which conidia were produced. The comparison of rice types for conidial production indicated that conidial yield, viability, and virulence to mosquitoes were more dependent upon the moisture level during growth and on the storage conditions that upon the rice used. The best storage conditions among those tested for the retention of both spore viability and virulence against mosquitoes were 19°C–97% RH and 4°C–0% RH.     

Effect of meteorological variates on persistence of primary conidia and capilliconidia of Erynia radicans (Zygomycotin: ntomophthorales) under natural conditions

Persistence of conidia of an isolate of Erynia radicans (Syn. Zoophthora radicans) was investigated in relation to the meteorological conditions which occurred during autumn-winter of 1990–91 in the coastal plain in Israel. Capilljconidia shielded from the sun, placed on the abaxial surface of leaves of Plumeria acuminata, persisted for 24 h to at least 120 h. Exposed capilliconidia, placed on the adaxial surface of the same leaves, died within 24 h. Almost all the primary conidia shielded from the sun (placed on the abaxial surface of the same leaves) died within a single day. Conidial viability was expressed in subsequent germination on an agar medium. Capilliconidial persistence was closely related to the daily air temperatures, expressed as cumulative day-degrees. Differences in relative humidity had no substantial effect on capilliconidial mortality. At daytime temperatures of ≤ 20°C, mortality after 24 h incubation was lowest (≤ 34%) and the persistence duration, longest (at least 120 h). Increases in daytime temperature up to 24°C for a few hours increased mortality (37–57% after 24 h incubation) and shortened the persistence duration (72–120 h). Exposure to 24–29°C during daytime greatly increased mortality (65–58% after 24 h) and further shortened the persistence duration (24–48 h). Daytime temperatures of > 29°C were lethal to all capilliconidia within 24 h. Temperature had a profound effect on capilliconidial persistence also under controlled environmental conditions. The significance of capiliiconidial persistence is discussed in relation to activity of the fungus in its natural environment.     

The enhanced infectivity of Metarhizium flavoviride in oil formulations to desert locusts at low humidities

Formulation in non-evaporative diluents such as oils is required to exploit the advantages of controlled droplet application methods for biopesticides based on conidial suspensions of entomopathogenic fungi. In laboratory assays on desert locusts (Schistocerca gregaria), formulations of Metarhizium flauoviride conidia in cotton seed oil showed superior performance to water-based suspensions and this was especially pronounced at low humidities (35% r.h.). The LD₅₀s for oil and water suspensions at 5 days were 8900 and > 10⁶ conidia/insect respectively. The dose-mortality regression line for oil was more than four times steeper and median lethal times were typically 76% of those for aqueous suspensions. Formulation in oil improves the efficacy of this fungus and may extend the application of species with lipophilic conidia into less humid agricultural environments.     

Studies on Prolonged Storage of Beauveria bassiana Conidia: Effects of Temperature and Relative Humidity on Conidial Viability and Virulence against Chickpea Borer,Helicoverpa armigera

Unformulated conidia of Beauveria bassiana were stored at five different temperatures (0°, 10°, 20°, 30° and 40°C) at six different relative humidities (RH) (0, 33, 53, 75, 85 and 98%). Conidial viabilities and virulence against third instar larvae of Helicoverpa armigera were determined over a 24‐month period. Conidia survived longest at lower temperatures (0–20°C) and lower RH levels (0–53% RH). At higher temperatures (30–40°C) conidia did not survive. When the temperature was decreased from 30°C to 0°C, at nearly all RH levels the longevity of conidia increased. Conidia remained virulent for third instar larvae of H. armigera under favourable storage conditions for 24 months.     

Twin-screw extrusion of ‘Pesta’-encapsulated biocontrol agents

World Journal of Microbiology and Biotechnology -